If you want to derive great satisfaction and time-saving when you clean your vehicle, then a pressure washer is a good go-to. You can find it useful for blowing off dust or debris of the tires or bodies and removing worn out paints. A word of caution, though.
Water pressures can range from benevolent to harmful amounts. Some pressures can damage vehicles, break surfaces and injure living things while some are gentle on surfaces.
Tips that are as narrow as less than 15 degrees pose safety concerns because of their piercing properties. Models differ in energy sources that drive them, including pneumatics, hydraulics, diesel or electricity.
As a buyer, check out the psi ratings to know what to expect. Pneumatic- or electric-powered pressure washers are common for home use. They exert water forces per unit area that rarely exceed 3000 psi. In this brief guide, you’ll gain an understanding of the safest and most suitable pressure washers for your purposes.
Is 2000 PSI Safe for Washing a Vehicle?
Depending on the material makeup, vehicles can withstand water pressures that exert between 1200 and 2200 pounds per square inch(psi) on their chassis. If the pressure exceeds 2200 psi, the gloss paint will peel off and the body may distort a bit. On the other hand, pressures below 1200 psi aren’t adequately forceful to remove dirt on the vehicle’s body. Pneumatic pressure washers pack up more punch than their electric counterparts. In case you want to remove grease and oil stains on your car engine, you can incorporate a degreaser to make it easy to blow away the sticky substances.
Is 3000 PSI too Much to Car?
Most vehicle bodies can’t withstand water pressures that exceed 2200 psi, even though some pneumatic pressure washers can achieve as much as 2800 or 3000 psi. If you own a gas pressure washer, then you can vary nozzle tip size so the emerging water hits several points instead of a single point. Narrower tips cover smaller areas but exert more pressure.
Red Tip Mode
Zero-to-15-degree tips concentrate lots of water amounts on a single point; hence, can damage the paint job, dent the body, or destroy the engine parts. They emit a sharp jet of water that can penetrate a body as hard as a boot. Be sure to keep a safe distance when you use this mode.
Green Tip Mode
A 25-degree tip still exerts pressures that the chassis can withstand but you can use it blast away dirt and debris from tires and vehicle beds. It’s the most preferred mode for home use because it packs enough punch for a wide range of purposes with little or no danger of ruining surfaces.
White Tip Mode
A 40-degree tip is the safest and fastest for your vehicle’s body because it distributes water evenly across different points and thus covers large areas fast. Be sure to hold the tip some 36- or 48-inches from the engine components.
How Many PSI do I Need to Clean Concrete?
Concrete can withstand the power of high-pressure pneumatics without running the risk of denting. As fine a tip as 0 or 15 degrees suits concrete cleanup. Molds, mildews or stains often cover driveways and walkways.
The narrow-tip nozzle can help you remove the eyesores. And so, nozzles with narrow spray patterns and focused water streams are suitable for cleaning concrete. However, red tip nozzles (0-degree) can break even the toughest concrete.
Can You Lower PSI on Pressure Washer?
Not all gas- and electricity-powered models come with an option to adjust pressure. Usually, these models contain a Vario Power Spray (VPS) dial, which you can turn to adjust pressure. Importantly, you can adjust angles of the tips of the nozzle between 0 and 40 degrees. If you want to preserve the fidelity of parts such engine components, blinds or windows, use white tip (40-degree) option.
If you want an optimal pressure that covers a wide area and packs some punch without risking damaging the surfaces, then choose the green tip (25-degree) option. But if you want to remove old paints and repaint surfaces, then choose yellow tip (15-degree) option.
The 0-degree (or red tip) option can even snap the strongest concrete. It’s a good option if you want to remove the stubbornest stains and rust wherein focusing on a point makes lots of sense.
The market is awash with pressure washers of different shapes and sizes. However, the most suitable product largely depends on what you intend to accomplish. If you intend to carry out large-scale or commercial cleanup as in mining, then more powerful hydraulic-powered options are at your disposal at an extra cost.
However, if you intend make use of pressure washers for homeowner use such as cleaning vehicles or driveways, then electric- or gas-powered options fit the bill. However, not all power washers give you the freedom to adjust psi values even though that isn’t something to worry as you can vary nozzle tip sizes instead.
All-in-all, you have got to study the psi ratings to understand whether what you intend to do matches your choice.